NNS Supplier Technical References & Guides

JUMP TO:

Information and links on the Supplier Technical Document page are provided to help our suppliers navigate the sometimes complex and challenging technical requirements associated with supplying material and components to Newport News Shipbuilding. Suppliers will find references, guides, contact, and submittal information below.

Please click on this link to contact NNS Supplier Quality.

By clicking on the Technical References and Guides links below, you will find:

  • Checklists to assist in submitting documents of the highest quality
  • Access to tools for developing procedures
  • Approved material specifications for use
  • Approved suppliers for certain controlled materials
  • Permanent material marking codes
  • Casting foundries with in-house machining capability

Procurement

Shock testing

Specifications

Welding

Acceptable Submittal Methods

  • SPARS (Shipbuilding Partners & Suppliers)
  • Mail or package courier to:
    Newport News Shipbuilding
    4101 Washington Ave.
    Newport News, VA 23607
    Attn: O52 Software Coordinator
    Bldg. 902-2

The checklists listed on this page are intended to provide guidance to our suppliers when submitting certain required technical documents to HII-NNS for review. These checklists were developed to increase first time quality of these documents. Use is highly encouraged and expected but not mandatory.
Feedback and questions may be provided via the [email protected] or by utilizing the Supplier Engineering Advocates (SEA) Group contact sheet.

 
All Document Submittal Checklists
Filter by:
Coded Note Topic Checklist/Useful Information
C2560NDTAID MIL-STD-2132D_NDT_C2560
C2560NDTMT DRY POWDER MIL-STD-2132D_NDT_C2560
C2560NDTMT WET POWDER MIL-STD-2132D_NDT_C2560
C2560NDTNavNDT Brochure_NDT_C2560
C2560NDTPT GROUP V and VI MIL-STD-2132D_NDT_C2560
C2560NDTPT Group I MIL-STD-2132D_NDT_C2560
C2560NDTUT MIL-STD-2132D_NDT_C2560
C2560NDTWelders Visual Inspection Handbook_NDT_C2560
LI021NDTAID MIL-STD-2132D_NDT_LI021
LI021NDTNAV03 - Non-Destructive Testing_NDT_LI021
LI021NDTNavNDT Brochure_NDT_LI021
N3180NDTAID MIL-STD-2132D_NDT_N3180
N3180NDTMT DRY POWDER MIL-STD-2132D_NDT_N3180
N3180NDTMT WET POWDER MIL-STD-2132D_NDT_N3180
N3180NDTNAV03 - Non-Destructive Testing_NDT_N3180
N3180NDTNavNDT Brochure_NDT_N3180
N3180NDTPT Group I MIL-STD-2132D_NDT_N3180
N3180NDTUT MIL-STD-2132D_NDT_N3180
N3180NDTWelders Visual Inspection Handbook_NDT_N3180
LI081DrawingsCertification Data Sheet_Drawings_LI081
D1190DrawingsCommercial Drawings_Drawings_D1190
S2110ShockHeavy Weight Grade A_Shock_S2110
S2110ShockHeavy Weight Grade B_Shock_S2110
S2110ShockLight Weight Grade A_Shock_S2110
S2110ShockLight Weight Grade B_Shock_S2110
S2110ShockMedium Weight Grade A_Shock_S2110
S2110ShockShock Extension_Shock_S2110
LI023NDTMT DRY POWDER MIL-STD-2132D_NDT_LI023
LI023NDTMT WET POWDER MIL-STD-2132D_NDT_LI023
LI023NDTNAV03 - Non-Destructive Testing_NDT_LI023
LI023NDTNavNDT Brochure_NDT_LI023
IC00KNDTNAV03 - Non-Destructive Testing_NDT_IC00K
IC00KNDTNavNDT Brochure_NDT_IC00K
IC00KNDTWelders Visual Inspection Handbook_NDT_IC00K
LI020NDTNAV03 - Non-Destructive Testing_NDT_LI020
LI020NDTNavNDT Brochure_NDT_LI020
LI020NDTUT MIL-STD-2132D_NDT_LI020
LI022NDTNAV03 - Non-Destructive Testing_NDT_LI022
LI022NDTNavNDT Brochure_NDT_LI022
LI022NDTPT Group I MIL-STD-2132D_NDT_LI022
LI024NDTNAV03 - Non-Destructive Testing_NDT_LI024
LI024NDTNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_NDT_LI024
LI024NDTNavNDT Brochure_NDT_LI024
LI028NDTNAV03 - Non-Destructive Testing_NDT_LI028
LI028NDTNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_NDT_LI028
LI028NDTNavNDT Brochure_NDT_LI028
LI070NDTNAV03 - Non-Destructive Testing_NDT_LI070
LI070NDTNavNDT Brochure_NDT_LI070
LI070NDTWelders Visual Inspection Handbook_NDT_LI070
LIA20NDTNAV03 - Non-Destructive Testing_NDT_LIA20
LIA20NDTNavNDT Brochure_NDT_LIA20
N3100NDTNAV03 - Non-Destructive Testing_NDT_N3100
N3100NDTNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_NDT_N3100
N3100NDTNavNDT Brochure_NDT_N3100
N3110NDTNAV03 - Non-Destructive Testing_NDT_N3110
N3110NDTNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_NDT_N3110
N3110NDTNavNDT Brochure_NDT_N3110
N3120NDTNAV03 - Non-Destructive Testing_NDT_N3120
N3120NDTNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_NDT_N3120
N3120NDTNavNDT Brochure_NDT_N3120
N3140NDTNAV03 - Non-Destructive Testing_NDT_N3140
N3140NDTNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_NDT_N3140
N3140NDTNavNDT Brochure_NDT_N3140
N3360NDTNAV03 - Non-Destructive Testing_NDT_N3360
N3360NDTNavNDT Brochure_NDT_N3360
N3400NDTNAV03 - Non-Destructive Testing_NDT_N3400
N3400NDTNavNDT Brochure_NDT_N3400
N3430WeldingNAV03 - Non-Destructive Testing_Welding_N3430
N3430WeldingNavNDT Brochure_Welding_N3430
N3430WeldingWelders Visual Inspection Handbook_Welding_N3430
LI061WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_LI061
LI061WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_LI061
LI061WeldingNavNDT Brochure_Welding_LI061
LI061WeldingNavWeld Brochure_Welding_LI061
LI061WeldingWelding & Brazing_Welding_LI061
LI066WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_LI066
LI066WeldingNavNDT Brochure_Welding_LI066
LI066WeldingNavWeld Brochure_Welding_LI066
LI066WeldingWelding & Brazing_Welding_LI066
LI069WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_LI069
LI069WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_LI069
LI069WeldingNavNDT Brochure_Welding_LI069
LI069WeldingNavWeld Brochure_Welding_LI069
LI069WeldingWelding & Brazing_Welding_LI069
LI071WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_LI071
LI071WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_LI071
LI071WeldingNavNDT Brochure_Welding_LI071
LI071WeldingNavWeld Brochure_Welding_LI071
LI071WeldingWelding & Brazing_Welding_LI071
LI072WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_LI072
LI072WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_LI072
LI072WeldingNavNDT Brochure_Welding_LI072
LI072WeldingNavWeld Brochure_Welding_LI072
LI072WeldingWelding & Brazing_Welding_LI072
LI073WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_LI073
LI073WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_LI073
LI073WeldingNavNDT Brochure_Welding_LI073
LI073WeldingNavWeld Brochure_Welding_LI073
LI073WeldingWelding & Brazing_Welding_LI073
W4020WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_W4020
W4020WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_W4020
W4020WeldingNavNDT Brochure_Welding_W4020
W4020WeldingNavWeld Brochure_Welding_W4020
W4020WeldingWelding & Brazing_Welding_W4020
W4030WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_W4030
W4030WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_W4030
W4030WeldingNNS Supplier Welding Checklist - No Appendix K_Welding_W4030
W4030WeldingNNS WWT - Piping Pressure Vessel Machinery Welded Workmanship Training for Non-Virginia Class Contractors andor Subcontractors_Welding_W4030
W4030WeldingNavNDT Brochure_Welding_W4030
W4030WeldingNavWeld Brochure_Welding_W4030
W4060WeldingNAV22 - Welding Weld Repair Audit Checklist_Welding_W4060
W4060WeldingNN 199-3 Rev 2 Radiographic Shooting Sketches - Additional_Welding_W4060
W4060WeldingNNS Supplier Welding Checklist - No Appendix K_Welding_W4060
W4060WeldingNNS WWT - Piping Pressure Vessel Machinery Welded Workmanship Training for Non-Virginia Class Contractors andor Subcontractors_Welding_W4060
W4060WeldingNavNDT Brochure_Welding_W4060
W4060WeldingNavWeld Brochure_Welding_W4060
N3410NDTNavNDT Brochure_NDT_N3410
N3410NDTWelders Visual Inspection Handbook_NDT_N3410
D1180DrawingsNavy Approval Drawings_Drawings_D1180
LI080DrawingsNavy Approval Drawings_Drawings_LI080
N2940VibrationVibration Extension Checklist_Vibration_N2940
N2940VibrationVibration Test Checklist_Vibration_N2940
C2560NDTMT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_C2560
C2560NDTPT PROCEDURE (T9074-AS-GIB-010271)_NDT_C2560
C2560NDTPiping, Pressure Vessel and Machinery Casting and Cast Weld Repairs - TP278_NDT_C2560
C2560NDTPiping, Pressure Vessel and Machinery Welds Completed Weld, Root Layer (1X and 5X) - TP278_NDT_C2560
C2560NDTStructure Completed Welds - NAVSHIPS 0900-000-1000 (1967) and PPD 802-6337597_NDT_C2560
C2560NDTStructure Welds - TP1688_NDT_C2560
C2560NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_C2560
C2560NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_C2560
C2560NDTWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_NDT_C2560
C2560NDTWWT TP248 PROCEDURE (TP278 WELDS)_NDT_C2560
IC00KNDTMT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_IC00K
IC00KNDTPT PROCEDURE (T9074-AS-GIB-010271)_NDT_IC00K
IC00KNDTPiping, Pressure Vessel and Machinery Casting and Cast Weld Repairs - TP278_NDT_IC00K
IC00KNDTPiping, Pressure Vessel and Machinery Welds Completed Weld, Root Layer (1X and 5X) - TP278_NDT_IC00K
IC00KNDTRT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_IC00K
IC00KNDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_IC00K
IC00KNDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_IC00K
LI023NDTMT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_LI023
LI023NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_LI023
N3180NDTMT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_N3180
N3180NDTPT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3180
N3180NDTPiping, Pressure Vessel and Machinery Casting and Cast Weld Repairs - TP278_NDT_N3180
N3180NDTPiping, Pressure Vessel and Machinery Welds Completed Weld, Root Layer (1X and 5X) - TP278_NDT_N3180
N3180NDTStructure Completed Welds - NAVSHIPS 0900-000-1000 (1967) and PPD 802-6337597_NDT_N3180
N3180NDTStructure Welds - TP1688_NDT_N3180
N3180NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3180
N3180NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_N3180
N3180NDTWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_NDT_N3180
N3180NDTWWT TP248 PROCEDURE (TP278 WELDS)_NDT_N3180
N3360NDTMT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_N3360
N3360NDTPT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3360
N3360NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3360
N3360NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_N3360
N3410NDTMT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_N3410
N3410NDTPT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3410
N3410NDTPiping, Pressure Vessel and Machinery Welds Completed Weld, Root Layer (1X and 5X) - TP278_NDT_N3410
N3410NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3410
N3410NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_N3410
N3410NDTWWT TP248 PROCEDURE (TP278 WELDS)_NDT_N3410
LI022NDTPT PROCEDURE (T9074-AS-GIB-010271)_NDT_LI022
LI022NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_LI022
LI070NDTPiping, Pressure Vessel and Machinery Casting and Cast Weld Repairs - TP278_NDT_LI070
LI070NDTPiping, Pressure Vessel and Machinery Welds Completed Weld, Root Layer (1X and 5X) - TP278_NDT_LI070
LI070NDTStructure Completed Welds - NAVSHIPS 0900-000-1000 (1967) and PPD 802-6337597_NDT_LI070
LI070NDTStructure Welds - TP1688_NDT_LI070
LI070NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_LI070
LI070NDTWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_NDT_LI070
LI070NDTWWT TP248 PROCEDURE (TP278 WELDS)_NDT_LI070
LI028NDTRT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_LI028
N3100NDTRT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_N3100
N3110NDTRT PROCEDURE T9074-AS-GIB-010271 REQUIREMENTS_NDT_N3110
LI020NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_LI020
LI020NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_LI020
LIA20NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_LIA20
LIA20NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_LIA20
N3400NDTUT PROCEDURE (T9074-AS-GIB-010271)_NDT_N3400
N3400NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_N3400
LI021NDTWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_NDT_LI021
S2110ShockMedium Weight Grade B_Shock_S2110
V1010VIRNN 3409 Rev 18 - Vendor Information Request_VIR_V1010
V1010VIRNN 9647 Rev 2- Specialty Metals Information Checklist_VIR_V1010
H1701HAZMATNN 9168 Rev 2 - Supplier Hazmat Review Form_HAZMAT_H1701
H1702HAZMATNN 9168 Rev 2 - Supplier Hazmat Review Form_HAZMAT_H1702
H1703HAZMATNN 9168 Rev 2 - Supplier Hazmat Review Form_HAZMAT_H1703
N3430WeldingPiping, Pressure Vessel and Machinery Welds Completed Weld, Root Layer (1X and 5X) - TP278_Welding_N3430
N3430WeldingWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_Welding_N3430
N3430WeldingWWT TP248 PROCEDURE (TP278 WELDS)_Welding_N3430
LI073WeldingStructure Welds - TP1688_Welding_LI073
LI073WeldingWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_Welding_LI073
W4030WeldingWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_Welding_W4030
W4060WeldingWRITTEN PRACTICE (WP) PROCEDURE T9074-AS-GIB-010271 (INCLUDING ACN-1 CHANGE)_Welding_W4060
LI069WeldingWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_Welding_LI069
LI071WeldingWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_Welding_LI071
LI072WeldingWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_Welding_LI072
W4020WeldingWWT TP248 PROCEDURE (TP1688, PPDs and MIL-STD-1689A WELDS_Welding_W4020
W4020WeldingWWT TP248 PROCEDURE (TP278 WELDS)_Welding_W4020
LI061WeldingWWT TP248 PROCEDURE (TP278 WELDS)_Welding_LI061

Visual Work Instruction (VWI)

A Visual Work Instruction (VWI) is a CAD Model based representation of technical instructions and product manufacturing information. Outsourced VWIs are intended for use as walkthroughs of the relevant details for the scope of work. This is accomplished through presentation of a product’s build/assembly sequence and design intent.
VWIs are created using the SAP Visual Enterprise.RH file format and are used across both Carrier (CVN) and Submarine (VCS/VPM) programs at Newport News Shipbuilding.
Visit our How to Download section for the direct link to the software needed to render VWIs through SAP’s free Visual Enterprise Viewer (VEV) program.

Siemens PSD+JT

PDF+JT is a 3D file format similar in form and function to an ISO standard 3D PDF. PDF+JTs are created by our program partner, Electric Boat, and used to convey technical product information in both a PDF and CAD model based format. These documents are assembled with relevant product manufacturing information (PMI) similar to paper based drawings with the additional benefit of embedded lightweight .JT model files for use as a visual aid.

PDF+JTs are created through use of Siemens software and are used for the Columbia (CLB) and Virginia Payload Module (VPM) programs at both Electric Boat and Newport News Shipbuilding.
Visit our How to Download section for the direct link to the software needed to render PDF+JT files through Siemens free JT2Go program.

Image 2
Image 1

NOTE: Model Based Disclosures (VWI and PDF+JT) are released with intended contractual dimensions. The vendor may use the native measurement tools from the relevant CAD rendering program to obtain additional measurements, however, measurements obtained in this manner are for Information Purposes Only.

Visual Work Instruction (VWI)

SAP provides a useful reference on its measurement tool for Visual Enterprise Viewer (VEV) which covers measurements, delta measurements, repositioning, cross sections and modification of global measurement settings. This reference can be found within SAP’s documentation here.

PDF + JT

Siemens provides a useful reference on its measurement tool for JT2Go version 12.3 on its documentation site. Topics covered include measurement of single parts, distances and angles, approximations, and preferences. This reference can be accessed here.

Please use the following form to notify us of any issues with the tools used. If it can be addressed by our technical support team, we would be happy to help.
Issues related to content will continue to be addressed via a Vendor Information Request (VIR) with your PO Coordinator and/or Buyer. However, please feel free to use the following form to notify us of the nature of your content issue. A list of issue types is given within the Issue Type dropdown for the form.

*Submitting a Tool Issue? Refer to Tools FAQ section as well.*

If you are experiencing issues, please contact Hector Naranjo or Doug Livermon at Newport News Shipbuilding.

For efficient rendering of 3D model deliverables, it is recommended that your machine have as a minimum a dedicated graphics card and 8 to 16 GB of RAM.

The details below offers two examples of adequate configurations that would handle the model based disclosures. Note, the brands utilized are for reference only and are not set recommendations.

Technical Desktop (i.e. HP Z240)
Processor: 3.5 GHz Intel Xeon E3 (4 Core)
RAM: 32 GB ECC
Storage: HP Z Turbo 512 GB SSD
Graphics Card: 4 GB VRM, NVIDIA Quadro K2200

Technical Desktop (i.e. HP Zbook 17 G3)
Processor: 2.5 GHz Intel Core i7-471-MQ CPU
RAM: 16 GB DDR RAM
Storage: HP Z Turbo 512 GB SSD
Graphics Card: 4 GB VRAM, NVIDIA Quadro K3100M

Rendering Software Downloads
Visual Work Instruction (VWI)
Method to open: Use SAP 3D Visual Enterprise Viewer, which can be downloaded here from the SAP site.

PDF+JT
Method to open: Use JT2Go which is standard software and can be downloaded here. A vendor has the option to open the JT Links in a PDF (that opens in Adobe) by rerouting to JT2Go.

Newport News Shipbuilding (NNS) is committed to providing a safe environment for all persons visiting or working at NNS. This means that contractors working at NNS and NNS worksites are required to meet minimum safety standards before contracts can be awarded. They are also required to maintain these standards for the duration of their work at Newport News. Also, while contractors are expected to have effective safety programs and to monitor and comply with applicable laws and regulations, there are some situations where procedures specific to NNS apply. The Newport News Contractor Environmental, Health and Safety Resource Manual was developed to assist potential and existing contractors in these areas. The manual describes the contractor health and safety evaluation process, describes specific EH&S programs that are considered critical and lists additional health and safety resources that may be useful to contractors. Many of the topics are contractual requirements. This manual is not inclusive of every possible Environmental, Health and Safety topic and it is the responsibility of the contractor to be knowledgeable of and comply with additional laws and regulations.

View selected sections below:

Introductions

Part I – General

Part II – Preventing Injuries and Illnesses

Employee Safety

Employee Health

Part III – Environmental Programs

Appendices

These files require Adobe Acrobat Reader. If you need it, get it here free.
Email questions regarding the content of this manual to [email protected]

Logo For Menu
Search
Close this search box.